Home › Samsung › Washing Machines › Error OE

Samsung Washing Machine Error Code OE: Overflow error

Applies to Samsung washing machines that show OE or OC, 0C, 0E on the display.

Quick answer

There is too much water in the washer. Stop the cycle, let the machine drain, and check you are not overdosing detergent.

What this code means

The level sensor reports more water than the cycle should contain. Excess detergent foam can also read as overfill, and a stuck inlet valve can keep filling past the set level.

The manufacturer's checks, in order

  1. Stop the cycle and let the washer drain.
  2. Check your detergent dose — too much detergent, or non-HE detergent in an HE washer, foams up and can trigger this code.
  3. If the washer keeps filling even with the power off, close the water supply valves: the inlet valve is stuck open.
Where you stop

If OE returns with a correct detergent dose, or the machine fills with the power off, request service — the inlet valve or level sensor needs attention.

Parts involved in this fault

PartWhy it is involvedTypical price
Water inlet valveA valve that no longer shuts fully keeps filling past the set level.$25-$60Check priceaffiliate slot
Water level pressure switchThe switch/sensor that tells the machine when to stop filling.$15-$40Check priceaffiliate slot
Same code, different brand

Error codes are not shared between brands. On LG washing machines, OE is the “Drain (water outlet) error” fault — see LG OE explained. Always read a code against your own brand's list.

Related Samsung washing machine codes

LE — Water level / leakage error4E — Not filling error5C — No drain errordE — Door errorUE — Unbalanced load error4C2 — Hot/cold error

Source & provenance. The meaning, the checks and their order, and the service line on this page are restated from Samsung official support — “Samsung Washing Machine Information and Error Codes” (source), read on 2026-11-06. No forum content, no invented repair steps, and nothing involving gas, refrigerant or mains wiring. Where the manufacturer says to request service, this page stops too.