Home › Samsung › Washing Machines › Error 8E
Samsung Washing Machine Error Code 8E: MEMS / vibration sensor error
Applies to Samsung washing machines that show 8E or BE, 8C, BC on the display.
The vibration (MEMS) sensor is reporting a fault. Note the overlap: on some models BE2/8E2 means a jammed button instead — your manual says which.
What this code means
This sensor watches drum vibration so the washer can protect itself during spin. Samsung flags that the same code family means different things on different models, so check your model's manual before assuming.
The manufacturer's checks, in order
- Power the washer off for 2–3 minutes.
- Power it back on and restart the cycle.
- If your display shows BE2 or 8E2, also work through the jammed-button checks on the E2 page — on some models that is what the code means.
If the error continues, Samsung says to request service.
Parts involved in this fault
| Part | Why it is involved | Typical price | |
|---|---|---|---|
| Replacement sensor (model-specific) | Sensors are model-specific — match the part number to your exact model. | $10-$40 | Check priceaffiliate slot |
Related Samsung washing machine codes
LE — Water level / leakage error4E — Not filling error5C — No drain errordE — Door errorUE — Unbalanced load error4C2 — Hot/cold error
Source & provenance. The meaning, the checks and their order, and the service line on this page are restated from Samsung official support — “Samsung Washing Machine Information and Error Codes” (source), read on 2026-11-06. No forum content, no invented repair steps, and nothing involving gas, refrigerant or mains wiring. Where the manufacturer says to request service, this page stops too.